Product
Automatic360° Rear Pick-up Cylinder Screen Printing Machine
Product Description

Suitable for UV partial/overall varnish on the offset printed substrate and screen printing on the scratching card, sticker and transfer paper etc .


         German BECKER oil                                                                      Pre-stacking board with rail
         free vacuum pump                                                                       for the feeder (optional item)

         Two stages high speed       Double sheets                    The embossed stainless      Ink dropping plate
         stream feeder                      preventing sensor              steel feeding board for
                                                                                                 reducing friction and
                                                                                                 avoiding the statics.

         Pushing/Pulling side           HMI touch panel                 Lowering type delivery      Screen frame pull-out device
         lay (on left/right sides)                                                    board for clean screen easily

 

Model
KW-72A
KW-86A
KW-105A
KW-116A
Max. substrate size (W*D) mm
720 x 520
800 x 600
1050 x 750
1160x830
Min. substrate size (W*D) mm
350 x 270
350 x 270
420 x 297
560 x 350
Max. printing area (W*D) mm
720 x 500
800 x 580
1050 x 730
1160 x 810
Substrate thickness (mm)
0.05~0.5
0.075~0.8
0.075~0.8
0.075~0.8
Printing speed (P/H)
800~3800
800~3600
800~3500
800~2200
Frame size (W*D) mm
880 x 880
1100 x 990
1300 x 1170
1430 x 1250
Screen frame thickness (mm)
30~35
Delivery board height (mm)
860
850
850
885
Squeegee angle adjustment
0~45°
Squeegee front/rear adjustment (L*W*H) cm
±15mm
Screen frame micro-adjustment (L*W*H) cm
±10mm
Printing accuracy (mm) (L*W*H) cm
±0.02
±0.03
±0.04
±0.05
Power source (L*W*H) cm
3∮ 220V/380V 50/60HZ
Power consumption (L*W*H) cm
6
6.75
9.5
10.25
Air pressure (L*W*H) cm
5~7kg/cm2
Dimension (L*W*H) cm
306*192*145
313*242*145
380*270*142
410*295*148
Weight (kg)
3300
3600
4450
5800
Optional accessories:
1. Air compressor (1HP)
2. Crossover delivery stand
3. Smaller vacuum holes of the printing cylinder.
4. Extra height of the feeding stacker (+300mm,)
5. Pre-stacking board with rail for the feeder
* The above figures may be changed depends on the type of substrate and printing condition.

 

Suitable for UV partial/overall varnish on the offset printed substrate and screen printing on the scratching card, sticker and transfer paper etc.


            German BECKER oil                                                                   Pre-stacking board with rail
            free vacuum pump                                                                    for the feeder (optional item)

         Two stages high speed       Double sheets                    The embossed stainless      Ink dropping plate
         stream feeder                      preventing sensor              steel feeding board for
                                                                                                 reducing friction and
                                                                                                 avoiding the statics.

         Pushing/Pulling side           HMI touch panel                Lowering type delivery       Screen frame pull-out device
         lay (on left/right sides)                                                   board for clean screen easily